The error d07. 20.11.2017
Похожие записи
Обзор стиральной машины gorenje WNEI84SDS 1-8kg
Помощь в выборе стиральной машины Telegram👉 Обзор стиральной машинки Gorenje WNEI84SDS 1-8kg 1400 rpm INVERTERPOWER DRIVE STEAMTECH EXTRAHYGIENE Made in Read more
Обзор стиральной машины с сушкой Haier HWD80-BP14979 85kg
Помощь в выборе стиральной машины Telegram 👉 Обзор стиральной машинки с сушкой Haier HWD80-BP14979 8/5kg Inverter motor Steam+Fresh 1400 rpm Read more
Стиральная машина WHIRLPOOL WRBSB 6228 B UA ОБЗОР
#фильтр#стирка#чистка#белье#обслуживание Ссылка на товар -
Door lock error or motor fail
Точно такая же ошибка и на моей машинке! Подскажите как решилась ваша проблема?
the board memory or motor fail or the beam between the motor and board memory
Sorry for the late response but hope it could help somebody who has this or similar wash machine.
All internet says about D07 error — door lock, or motor/motor brash and/or cabling/connection between motor and board. Not in my case. Brushes looked like new! Didn’t stick. Motor conductivity was well. The main board was faulty — as finally found. New board is seldom on the market and expensive — up to 25% of the whole this new wash machine cost. I managed to find pcb board repair service in Moscow. They fixed the board but from second try.
What they did — you want ask. Don’t sure exactly, but would suggest start from soldering of all pins on the PCB (vibration can destroy good conductivity of the pin contacts). Second advice check or immediately replace electrolytic capacitors. The last advise — brought pcb to Moscow guys:) (I didn’t solder the PCB this time myself) Good luck!
The problem is at 90% problem with the motor. Charcoals